Please use this identifier to cite or link to this item:
https://hdl.handle.net/2440/117315
Citations | ||
Scopus | Web of Science® | Altmetric |
---|---|---|
?
|
?
|
Type: | Journal article |
Title: | CO₂ and water vapor-tolerant yttria stabilized bismuth oxide (YSB) membranes with external short circuit for oxygen separation with CO₂ capture at intermediate temperatures |
Other Titles: | CO(2) and water vapor-tolerant yttria stabilized bismuth oxide (YSB) membranes with external short circuit for oxygen separation with CO(2) capture at intermediate temperatures |
Author: | Zhang, K. Zou, Y. Su, C. Shao, Z. Liu, L. Wang, S. Liu, S. |
Citation: | Journal of Membrane Science, 2013; 427:168-175 |
Publisher: | Elsevier |
Issue Date: | 2013 |
ISSN: | 0376-7388 1873-3123 |
Statement of Responsibility: | KunZhang, Yuan Zou, Chao Su, Zongping Shao, Lihong Liu, Shaobin Wang, Shaomin Liu |
Abstract: | Yttria stabilized bismuth oxide (YSB) membranes were prepared using a self-made YSB powder with sintering temperatures down to 750 °C. The membrane was characterized by SEM, porosity measurement, electrochemical impedance measurement and composition detection by plasma-optical emission spectrometry. The prepared membranes were tested for air separation under a new concept in the field-pure ion conductor with external short circuit. The influences of CO2 and water vapor in the sweep gas on the O2 permeation behavior of the resultant YSB membranes have been investigated. The O2 permeation fluxes of the YSB membrane decreased with increasing the CO2 concentration in the sweep gas. Such flux decline is a very normal phenomenon due to the strong chemical adsorption of CO2 to the membrane surface. YSB can withstand the presence of CO2 atmospheres at high temperatures without causing any reaction between the two phases. More interesting is that, contrary to the negative effect of the water vapor on other membranes like perovskite, the presence of H2O is beneficial for O2 permeation through the YSB membrane. The maximum oxygen flux achieved was 1.33 ml cm−2 min−1 at 850 °C for the YSB membrane with a thickness of 1 mm. Thin-film membrane technology and surface modification can help to further improve the O2 fluxes to be of practical interest. |
Keywords: | Ceramic membrane; Yttria stabilized bismuth oxide; O2 permeation; CO2 |
Rights: | © 2012 Elsevier B.V. All rights reserved. |
DOI: | 10.1016/j.memsci.2012.09.015 |
Grant ID: | http://purl.org/au-research/grants/arc/DP0878849 http://purl.org/au-research/grants/arc/DP0985578 |
Published version: | http://dx.doi.org/10.1016/j.memsci.2012.09.015 |
Appears in Collections: | Aurora harvest 8 Chemical Engineering publications |
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.