Browsing "University Library" by Author Deng, A.

Jump to: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
or enter first few letters:  
Showing results 68 to 87 of 89 < previous   next >
PreviewIssue DateTitleAuthor(s)
2020The arching effect in rubber-sand mixturesKhatami, H.; Deng, A.; Jaksa, M.
2011The GA improved ANN-synergy-bifurcation model method on slope slide forecastingGuo, H.; Yu, L.; Deng, A.; Liu, H.; Liang, R.; Yang, K.; Nusairat, J.; GeoHunan International Conference (2011 : Hunan, China)
2010Thermal conductivity of WFS-FA-EPS mixture subjected to frost actionDeng, A.; Yu, Y.; Datta, M.; Srivastava, R.; Ramana, G.; Shahu, J.; International Congress on Environmental Geotechnics (ICEG) (8 Nov 2010 - 12 Nov 2010 : New Delhi, India)
2018Three-dimensional discrete element modeling of direct shear test for granular rubber-sandWang, C.; Deng, A.; Taheri, A.
2020Three-dimensional discrete-element modeling of geocell-reinforced ballast considering breakageLiu, Y.; Deng, A.; Jaksa, M.
2018Three-dimensional modeling of geocell-reinforced straight and curved ballast embankmentsLiu, Y.; Deng, A.; Jaksa, M.
2009Use of large-diameter, cast-in situ concrete pipe piles for embankment over soft clayLiu, H.; Chu, J.; Deng, A.
2008Vibration isolation behavior of EPS reinforced highway embankmentsGao, H.; Deng, A.; Liu, H.; Liu, H.; Deng, A.; Chu, J.; International Conference of Geotechnical Engineering for Disaster Mitigation and Rehabilitation (2nd : 2008 : Nanjing, China)
2010WFS-FA-EPS 填料导热系数试验研究Deng, A.; Yu, Y.; Wang, H.
2012冻结作用下复合填料水分迁移与冻胀特性研究He, Z.; Deng, A.; Wang, H.; Ni, L.
2009冻融循环对轻质填料抗压强度的影响Deng, A.; Yu, Y.
2014分段线性差分一维大变形电渗固结模型Zhou, Y.; Deng, A.
2007固化滨海盐渍土耐久性试验研究Zhou, Q.; Deng, A.; Han, W.; Chai, S.; Wang, P.
2010基于椭圆-抛物双屈服面模型的广义泊松比研究Deng, A.; Xiao, Y.
2009基于椭圆–抛物双屈服面模型的砂–聚苯乙烯颗粒轻质 填料应力应变分析Xiao, Y.; Deng, A.
2012复合填料一维冻胀量数值模拟分析Qi, S.; Deng, A.
2012复合填料热传导过程数值模拟Fang, X.; Deng, A.
2011干湿循环下复合固废填料配比对强度的影响He, Z.; Deng, A.; Zhou, Y.; Wang, H.
2009废铸砂作为建筑材料资源化再利用研究进展Deng, A.
2009掺入轮胎橡胶颗粒对砂土剪切性状的影响Deng, A.; Feng, J.