Browsing "University Library" by Author Deng, A.

Jump to: 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
or enter first few letters:  
Showing results 26 to 45 of 89 < previous   next >
PreviewIssue DateTitleAuthor(s)
2020Failure mechanism and bearing capacity of vertically loaded pile with partially-screwed shaft: experiment and simulationsChen, Y.; Deng, A.; Lu, F.; Sun, H.
2019Failure mechanisms of geocell walls and junctionsLiu, Y.; Deng, A.; Jaksa, M.
2013Finite-difference model for one-dimensional electro-osmotic consolidationZhou, Y.; Deng, A.; Wang, C.
2011Frost heave mitigation by incorporating expanded polystyrene bead into earth fillDeng, A.; Zhou, Y.; Yu, Y.; Ge, L.; Zhang, X.; Correia, A.; Wu, J.; GeoHunan International Conference (2011 : Hunan, China)
2008Geotechnical and leaching properties of flowable fill incorporating waste foundry sandDeng, A.; Tikalsky, P.
2009Granular lightweight fill composed of sand and tire scrapDeng, A.; Feng, J.; Zhang, X.; Yu, X.; Fu, H.; Zhang, J.; GeoHunan International Conference (2009 : Changsha, Hunan, China)
2014Hydraulic conductivity of Hindmarsh clay amended by polymeric additiveDeng, A.; McBride, L.; Bouazza, A.; Yuen, S.; Brown, B.; 7th International Congress on Environmental Geotechnics (iceg2014) (10 Nov 2014 - 14 Nov 2014 : Melbourne, VIC.)
2011Impact of drying-wetting on strength of a cement-treated lightweight fillDeng, A.; Zhou, Y.D.; He, Z.; Asian Regional Conference on Soil Mechanics and Geotechnical Engineering (14th : 2011 : Hong Kong)
2017Influences of stiffness ratio, friction coefficient and strength ratio on the macro behavior of cemented sand based on DEMZhao, H.; Sang, Y.; Deng, A.; Ge, L.; Li, X.; Feng, Y.; Mustoe, G.; 7th International Conference on Discrete Element Methods (DEM 2016) (1 Aug 2016 - 4 Aug 2016 : Dalian, China)
2019Interfacial shear strength of rubber-reinforced clays: a dimensional analysis perspectiveSoltani, A.; Deng, A.; Taheri, A.; Mirzababaei, M.; Nikraz, H.
2009Management, minimization, and recycle of metal casting wastesDeng, A.; Hung, Y.; Wang, L.; Wang, L.; Shammas, N.; Hung, Y.
2010Measuring and modeling proportion-dependent stress-strain behavior of EPS-sand mixtureDeng, A.; Xiao, Y.
2019Mechanical behavior of micaceous claysZhang, J.; Soltani, A.; Deng, A.; Jaksa, M.B.
2019Mechanical performance of Jute Fiber-reinforced micaceous clay composites treated with Ground-Granulated Blast-Furnace SlagZhang, J.; Soltani, A.; Deng, A.; Jaksa, M.B.
2008Mechanism and prevention of highway distress in seasonal frost areaYu, Y.; Deng, A.; Liu, H.; Deng, A.; Chu, J.; International Conference of Geotechnical Engineering for Disaster Mitigation and Rehabilitation (2nd : 2008 : Nanjing, China)
2016Modeling electroosmosis and surcharge preloading consolidation I: Model formulationDeng, A.; Zhou, Y.
2016Modeling electroosmosis and surcharge preloading consolidation. II: Validation and simulation resultsDeng, A.; Zhou, Y.
2020Modeling lightweight cemented backfill considering progressive breakageYu, C.; Deng, A.; Nguyen, G.
2013Modeling mechanical response of cemented EPS-backfillDeng, A.; Feng, J.; Congress on Stability and Performance of Slopes and Embankments (2013 : San Diego)
2009Modeling stress-strain behavior of sand-EPS beads lightweight fills based on cam-clay modelsDeng, A.; Xiao, Y.; Ali, L.; Correia, A.; Yang, J.; Tao, M.; GeoHunan International Conference (2009 : Changsha, Hunan, China)